Description
This 4-tonne 2-post lift comes with 3-stage arms instead of 2-stage swan necks. With an H-Frame floor mount it has a massive 4-tonne lifting capacity, comes with a 12-month warranty, and has a lifting time of less than 45 seconds.
This is the Eurotek U-T40EFB Full H-based 2-post car lift designed with a H-Frame floor mount plate made from high tensile steel for the purpose of added strength and stability when lifting a car on your 2-post vehicle lift. It has been built to be both affordable whilst remaining incredibly capable and versatile.
This 2 post lift comes with double height screw pads as standard which adjust from a low 110mm in 2 stages all the way up to 150mm and also includes a set of four 60mm height pad extensions ideal for avoiding the side steps on 4×4’s and a set of four 90mm extensions for lifting van’s and avoiding sill damage.
Often installations will be refused because you do not have the required depth or strength of concrete required to hold a 2-post car lift and vehicle to the floor. So, for that reason the platinum 42FE 2 post lift has the H-frame to support the inward pull force of the 2 posts and vehicle.
For added safety the Eurotek UT40EFB Full Based Lift comes complete with a fully electronic safety release system so the locks are always engaged when you are working under the lift.
This ramp can lift some van’s however it is not specifically designed for long wheel-based vans. As an alternative to this 4 tonne 2 post lift we can offer a 2 post van lift with a huge 5 tonne lifting capacity and longer reach 3-stage arms specifically designed for long wheel based vans, take a look at the Eurotek UT50E 5 Tonne 2 Post Van Lift.
Eurotek lifts are tested and certified to UKCA & CE standards bearing the recognised UKCA & CE mark and are supplied with a 12 month parts only warranty for your piece of mind.
FEATURES & BENEFITS:
- H – FRAME, CONCRETE SUPPORT BASE UNIT
- 4-TON LIFTING CAPACITY
- TWIN HYDRAULIC CYLINDERS FOR POWERFUL LIFTING
- FAN ASSISTED FINNED MOTOR WITH 2.2 KW POWER
- AVAILABLE IN 240V OR 415V WITHOUT EFFECTING THE PERFORMANCE.
- LIFTING SPEED OF LESS THAN 45S
- DOUBLE HEIGHT SCREW PADS ADJUSTABLE FROM 90 MM – 150 MM ON 3-STAGE ARMS
- 60 MM & 90 MM SCREW PAD EXTENSIONS FOR ADDED PAD HEIGHT.
- AUTOMATIC SAFETY RELEASE SYSTEM
- AUTOMATIC ARM LOCKING SYSTEM.
- 12 MONTHS WARRANTY*
TECHNICAL DATA:
| Lifting Capacity | 4000KG |
| Maximum Lifting Height | 1910MM |
| Initial Pad Height | 110MM |
| Aproximate Lifting Time | <45 SECONDS. |
| Approximate Decent Time | <45 SECONDS |
| Power Requirment | 240V/415V |
| Overall Height | 2850MM |
| Overal Width | 3420MM |
| Internal Width | 2616MM |
| Motor Power | 2.2KW |
| Whole Machine Weight | 616KG |
*TERMS & CONDITIONS APPLY. All Eurotek 2 Post Car Lifts are supplied with a 12-month Parts Only Warranty.
For any vehicle lift advice please call us today on 0113 469 0572 or use the contact form.
