CLASS 7 MOT BAYS
Installing a class 7 MOT bay may be the best option for you. If you are a garage or workshop that works with cars and light commercials, then installing a class 7 bay is what you require. This will allow you to MOT test cars (class 4) and light commercials too (class 7) all on one bay. We offer a wide range of class 7 MOT bay lifts with various platform lengths. Platform length will depend on the space available within your garage or workshop.
At Concept Garage Equipment we understand that space may be limited, or you may have ample space either way your dedicated project manager will advise you on the best most cost-effective way to install your new MOT equipment. We have a wealth of experience within the MOT industry giving you the confidence that what you need can be done the right way.
You may not have the height required for DVSA regulations or the length you need to install an MOT bay but don’t worry if there is a way, we will find it for you. MOT bays come in many configurations such as pit style if height is an issue or four post lift or even a scissor lift if the width is a problem. You may be looking for an OPTL (One Person Test Lane) or ATL (Automated Test Lane) or even a TPTL (Two-person Test Lane). Whatever you need we have it for you.
There are many ways to lay out an MOT bay. That may be inline, side by side or even drive-through. The ramp can also be installed within a recess or surface mounted. Your project manager will find the best most cost-effective option for you to retain as much space as possible for other equipment like tyre changers or wheel balancers making your garage or workshop as profitable as possible.
All our MOT bay packages come with free on-site measuring, design, and project management from your dedicated project manager. All our equipment is European-made and installed by our trained and experienced installation engineers who will give you all the on-site training you need once your equipment is installed. Leaving you confident in using your new MOT equipment.
We also offer an extensive industry-leading aftersales service. Our job doesn’t end when your installation is complete, and you are signed off by DVSA. We are with you every step of the way up to and way beyond installation. If you need any help or advice, we will be right by your side.
Our Class 7 MOT Bay covers all you need for MOT testing on Cars and Goods vehicles (over 3,000kg up to 3,500kg design gross weight), including an ATL ramp, roller brake tester and headlamp beam tester.
CLASS 7 MOT BAY PACKAGE INCLUDES:
- Class 7 MOT ATL ramp (if required)
- Play detector (stand-alone or on the platform)
- Radius turn plates
- Manually operated Jacking beam
- Roller brake tester
- Combi Emissions machine
- Headlamp beam tester
- MOT ancillary pack/signage
- Project management including DVSA CAD drawing and DVSA application
- Roller brake tester in ground cassette
- Classes 1 & 2 RBT adaption kit
- Steel pit liner (if required)
NOTE: MOT Bay image is shown for illustration purposes only and may not represent the class of MOT Bay described
For a full MOT Bay design and installation including supply of all equipment needed, groundwork, full testing and staff training, or for any MOT Bay or MOT Equipment advice or information please call us today on 0113 469 0572 or use the contact form.